Service Points : KT 2595 with Positional Display
  

KT 2595 with Positional Display

KT2595 with a Positional Display.

Global Settings

 
Parameter
Description
Name
Name of the Unit.
Description
Description of the Unit.
Template name
Name of the Unit Type Template
Template version
Version of the Unit Type Template
Timeout between keystrokes
Max time between keystrokes before terminal goes back to default state (seconds).
LCD refresh time
Timeout between automatic refresh of information in the KT LCD (seconds). Set to 0 to not refresh at all.
24 Hour clock
If this check box is checked, the time should be displayed with a 24 hour clock. If it is not checked, it should be displayed with a 12 hour clock.
Min time between call next
Defines the time that must elapse between two call next on a Service Point for a specific user (seconds).
 

Equipment Profile Level Settings

 
Parameter
Description
Name
Name of the Unit.
Description
Description of the Unit.
Type name
Name of the Unit Type.
Type description
Description of the Unit Type.
Unit id
Identification code of the Unit.
Media Application
Name of the Media Application Surface created in the Surface Editor. Generic resolutions can also be used. For more information, see the Surface Editing chapter of the Administrator’s Guide, on Qmatic World.
Store next
Defines if store next is enabled or not.
P1 behavior
Behavior of button P1. Available choices are: User defined work profile, Locked to work profile 1, Locked to profile 2, Locked to profile 3, Locked to profile 4, or Locked to profile 5.
P2 behavior
Behavior of button P2. Available choices are: User defined work profile, Locked to work profile 1, Locked to profile 2, Locked to profile 3, Locked to profile 4, or Locked to profile 5.
P3 behavior
Behavior of button P3. Available choices are: User defined work profile, Locked to work profile 1, Locked to profile 2, Locked to profile 3, Locked to profile 4, or Locked to profile 5.
P4 behavior
Behavior of button P4. Available choices are: User defined work profile, Locked to work profile 1, Locked to profile 2, Locked to profile 3, Locked to profile 4, or Locked to profile 5.
P5 behavior
Behavior of button P5. Available choices are: User defined work profile, Locked to work profile 1, Locked to profile 2, Locked to profile 3, Locked to profile 4, or Locked to profile 5.
Green LED
Select the wanted behavior of the green LED, from the drop-down list.
Red LED
Select the wanted behavior of the red LED, from the drop-down list.
Use login
Check this check box if you want to log in before using the terminal.
Logout on close
Automatically log out when closing Service Point.
Auto close
Automatically close Service Point after this time of inactivity (seconds).
Device Controller
From the drop-down list, select which default Device Controller should be used.
 

Branch Level Settings

 
Parameter
Description
Default name
Default name of the Unit.
Description
Description of the Unit.
Number of units (max 127)
Enter the number of units to create when publishing this unit to a configuration.
Unit Identifiers
A table with unit identifiers, which is dependant on which Number of units you have entered in the field above. So, if the number 4, for example is entered, the table will automatically get 4 rows.
The two columns of the table are:
Name - Name of the unit, by default the name of the unit plus a sequential number, for example WebReception 5 or WebServicePoint 2. Can be changed to anything, so long as the name is unique, within the Branch.
Logic Id - An ID used in the connectors. The Logic Id continues with the next number in the sequence of the auto generated ID's within the Unit Type (e.g. Service Points, Entry Points, or Presentation Points). The number can be changed to anything, in the range of 1-9999, as long as it is unique within the Service Point, Entry Point, or Presentation Point.
Example: If you have a total of 4 units and let the first three keep the automatically set Logic Id’s 1-3, then manually set the fourth unit to Logic Id 12, then change the Number of units to 5, the fifth unit will automatically get Logic Id 4.
Unit id
Identification code of the Unit.
ID Code
ID code. Valid values between 1-125.
Media Application
Name of the Media Application Surface that is used.
Device Controller
Name of Device Controller that is used.